
10m 230V Level 2 Home Ev Charger Electric Car Charging Points For The Home
Contact Person : sales
Phone Number : 13961612056
WhatsApp : +8613961612056
Detail Information |
|||
Type: | Electric EV Charger For Home | Charging Port: | 3 Ports, 2 Ports, 1port, 4 Ports, Type C |
---|---|---|---|
Cable Length: | 5M/10M/15M | Operating Temperature: | -30℃~50℃ |
Protection: | IP54 IP65 IP66 | Operation Mode: | Touch Button |
Current: | 6A-16A, 32A | Charging Plug: | Type 1 Type 2 |
Connector Type: | IEC 62196 / SAE J1772 | Installation: | Portable ,no Install |
High Light: | 10m cable Home EV Charger,32A Home EV Charger,portable level 2 ev charger 62196 2 |
Product Description
CE ROHS 62196-2 Car Charging Electric EV Charger Box For Home
EV charger parameter
|
|
In put Power:
|
110V-250V AC
|
ChargingCurrent :
|
6A/8A/12A/14A/16A
|
Length :
|
5 meters
|
Output Power:
|
3.5KW
|
Mechanical life:
|
plug in/out > 10000 times
|
Impact of external force:
|
can afford 1m drop and 2t vehicle run over pressure
|
Insulation resistance:
|
> 1000MD (DC500V)
|
Terminal temperature rise:
|
< 50K
|
Housing Fire Rating:
|
UL94V-0
|
Appearance
|
Rated power
|
Type 2: 7/22kw
Type 1: 9kw
|
Input Voltage
|
Single phase:230V±10%
Three phase:400V±10%
|
|
Output Current
|
Type 2:7kw-single phase 32A
22kw-three phase 32A
Type 1:9kw-single phase 40A
|
|
Functional Features
|
User Interface
|
Emergency Stop/LED indicator/RFID
|
Safety Features
|
Overvoltage/undervoltage protection, overload protection,
leakage protection, Overcurrent protection
|
|
Communication
|
Internet Interface
|
Ethernet(WIFI, 3g/4gLTE as optional)
|
OCPP
|
OCPP 1.6J
|
|
Working environment
|
Working latitude
|
<2000m
|
Working temperature
|
-30° C~+55° C
|
|
Working humidity
|
5 %~ 95%
|
|
Protection level
|
IP55
|
|
Cooling
|
Natural cooling
|
|
Safety standards
|
IEC61851-1/2017
|
|
Special protection
|
Anti-UV protection
|
All products must pass the following inspection before leaving the factory:
1. Function test:
A. charging function control test,
B. communication function test,
C. insulation detection function test,
D. vehicle plug locking function test,
E. pre-charging function test
2. Charging output test:
A. four ui large constant power output test,
B. power control test,
C. low-voltage auxiliary power test,
D. output current response time test,
E. transmission out current stopping rate test,
F. efficiency test,
G. power factor test.
3. control guide test:
A. charging control state test,
B. charging connection control timing test,
C. control guide voltage limit test,
D. communication interruption test,
E. protection grounding continuity loss test,
F. connection detection signal disconnection test,
G. battery voltage and communication message does not match the test,
H. battery voltage exceeds the charger range test,
I. draw battery two protection function vehicle zu high allowable total voltage mismatch test,
J. charging demand is greater than Battery parameters test.
Enter Your Message